BP5034B20 a c/dc con v er ter ??absolute maxim um ratings input v oltage output current esd endurance oper ating temper ature r ange stor age temper ature r ange p ar ameter symbol limits unit vi io vsurge t opr tstg 195 80 2 ?|20 ?` +80 ?|25 ?` +85 v mapk kv ?? ?? unit ??2 ??2 ??1 conditions v v ma v v vp-p % dc(80?`138v a c) vi=141v , io=50ma vi=141v vi=113?`195v , io=50ma vi=141v , io=0?`50ma vi=141v , io=50ma vi=141v , io=80ma ??1 maxim um output current v ar ies depending on ambient temper ature ; please ref er to der ating cur v e . ??2 please ref er to load regulation, con v ersion effciency . ??electr ical char acter istics input v oltage r ange output v oltage output current line regulation load regulation output r ipple v oltage p o w er con v ersion effciency p ar ameter symbol t yp . max. min. vi v o io vr vl vp ?? 141 20.0 ?| 0.02 0.05 0.05 72 195 21.5 80 0.3 0.5 0.2 ?| 113 18.5 0 ?| ?| ?| 65 ??load regulation load regulation 21.5 21.2 20.9 20.6 20.3 20.0 19.7 19.4 19.1 18.8 18.5 20 0 40 60 80 (t a=25??, vi=141v) output current io(ma) output v oltage v o(v) ??con v ersion efficiency 65% min?|line con v ersion efficiency 80 70 60 50 40 30 20 10 0 20 0 40 60 80 (t a=25??, vi=141v) output current io(ma) con v ersion efficiency ??(%) ??surf ace t emper ature rising surf ace t emper ature rising 40 30 20 10 0 20 0 40 60 80 (t a=25??, vi=141v) output current io(ma) t emper ature rising ?bt(??) ??switching f requency switching f requency 140 120 100 80 60 40 20 0 20 0 40 60 80 (t a=25??, vi=141v) output current io(ma) switching f requency fs w(khz) ??dimension(unit ?fmm ) ??application circuit exter nal components setting fuse: fuse please make sure to use quic k acting fuse 0.5a capacitance : 3.3f?`22f rated v oltage : 200v or higher ripple current is 0.13ar ms abo v e . capacitance : 0.1?f?`0.22?f rated v oltage : 200v or higher film capacitor or cer amic capacitor . reduce the noise ter minal v oltage . the constant v alue should be e v aluated in the set. c1: capacitor f or input v oltage smoothing c2: f or noise ter minal v oltage reduction capacitance : 100f?`470f rated v oltage : 50v or higher , esr is 0.39 max. ripple current is 0.1ar ms abo v e . output noise v oltage is influenced.please e v aluate it in the actual set. c3: capacitor f or output voltage smooting in the absolute maximum ratings, the reverse peak voltage should be 400v or higher, the average rectifying current should be 0.5a or higher , and the f orw ard peak current should be 20a or higher . ?ifull-w a v e rectifier can be used in our par t.?j d1: rectifier diode 10 ?`22 1/4w reduce the noise ter minal v oltage .the constant v alue should be e v aluated in set. r1: f or noise ter minal v oltage reduction v ar istor m ust be used. it protects this par t from lightning surge and static electr icity . znr: v ar istor pin no . 1 2 3 4 5 6 7 8 9 10 function output ter minal v o(20v) n.c . n.c . n.c . common common n.c . n.c . not used input ter minal vi(141vdc) f or acutual usage , please kindly e v aluate and confir m our par t mounted in y our product, especially , please mak e sure to confir m the load current does not e xceed max. r ated current b y using the current probe . BP5034B20 be sure to use fuse f or saf ety . a c100v input, 20v/80ma output 15.7max. mar k side 4?}1.0 28.2max. 10.0max. 3.5max. 6.5max. 2.54?~9=22.86 1?@2?@3?@4?@5?@6?@7?@8?@ ?@10 0.5?}0.1 p=2.54?}0.2 1.3?}0.2 0.25?}0.05 3.25max ??der ating cur v e der ating cur v e oper ation range 100 90 80 70 60 50 40 30 20 10 0 0 10 -30 -20 -10 20 40 30 80 70 60 50 90 ambient t emper ature t a(??) output current io(ma) please note that pin no .10 side is input. ?{20v output input 100f/50v a c100v 50hz/60hz 0.1f c2 fuse 0.5a 1 10 8 7 6 5 4 3 2 ?{ ?| ?{ ?| 10f/250v c1 znr 220v r1 10 1/4w d1 1sr35?|400a c3 1/2
precautions on use of r ohm p o w er module a c/dc con v er ter char acter istic 1) the products are designed and produced f or application in ordinar y electronic equipment (a v equipment, o a equipment, telecomm unication equipment, home appliances , am usement equipment etc.). if the products are to be used in de vices requir ing e xtremely high reliability (medical equipment, tr anspor t equipment, aircr aft/spacecr aft, n uclear po w er controllers , fuel controllers , car equipment including car accessor ies , saf ety de vices , etc.) and whose malfunction or oper ational error ma y endanger human lif e and sufficient f ail-saf e measures , please consult with the compan y's sales staff in adv ance . if product malfunctions ma y result in ser ious damage , including that to human lif e , sufficient f ail-saf e measures m ust be tak en, including the f ollo wing: [a] installation of protection circuits or other protectiv e de vices to impro v e system saf ety [b] installation of redundant circuits in the case of single-circuit f ailure 2) the products are designed f or use in a standard en vironment and not in an y special en vironments . application of the products in a special en vironment can deter ior ate product perf or mance . accordingly , v er ification and confir mation of product perf or mance , pr ior to use , is recommended if used under the f ollo wing conditions: [a] use in v ar ious types of liquid, including w ater , oils , chemicals , and organic solv ents [b] use outdoors where the products are e xposed to direct sunlight, or in dusty places [c] use in places where the products are e xposed to sea winds or corrosiv e gases , including cl2, h2s , nh3, so2, and no2 [d] use in places where the products are e xposed to static electr icity or electromagnetic w a v es [e] use in pro ximity to heat-producing components , plastic cords , or othe flammab le items [f] use in v olving sealing or coating the products with resin or other coating mater ials [g] use in v olving unclean solder or use of w ater or w ater-solub le cleaning agents f or cleaning after solder ing [h] use of the products in places subject to de w condensation 3) the products are not r adiation resistant. 4) the compan y is not responsib le f or an y prob lems resulting from use of the products under conditions not recommended herein. 5) the compan y should be notified of an y product saf ety issues . moreo v er , product saf ety issues should be per iodically monitored b y the customer . saf ety precautions 1) if change is made to the constant of an e xter nal circuit, allo w a sufficient margin due to v ar iations of the char acter istics of the products and e xter nal components , including tr ansient char acter istics , as w ell as static char acter istics . please be inf or med that the compan y has not conducted in v estigations on whether or not par ticular changes in the application e xamples or e xter nal circuits w ould result in the infr ingement of patent r ights of a third par ty . 2) the application e xamples , their constants , and other types of inf or mation contained herein are applicab le only when the products are used in accordance with standard methods . theref ore , if mass production is intended, sufficient consider ation to e xter nal conditions m ust be made . precautions regarding application example and exter nal circuits 1) these specifications contain inf or mation related to the compan y? s industr ial proper ty . an y use of them other than per taining to the usage of appropr iate products is not per mitted. duplication of these specifications and its disclosure to a third par ty without the compan y? s per mission is prohibited. 2) inf or mation and data on products , including application e xamples , contained in these specifications are simply f or ref erence; the compan y does not guar antee an y industr ial proper ty r ights , intellectual proper ty r ights , or an y other r ights of a third par ty regarding this inf or mation or data. accordingly , the compan y does not bear an y responsibility f or : [a] infr ingement of the intellectual proper ty r ights of a third par ty [b] an y prob lems incurred b y the use of the products listed herein. 3) the compan y prohibits the purchaser of its products to e x ercise or use the intellectual proper ty r ights , industr ial proper ty r ights , or an y other r ights that either belong to or are controlled b y the compan y , other than the r ight to use , sell, or dispose of the products . prohibitions regarding industr ial proper ty 4 r ohm's a c/dc con v er ter is a po w er module that can gain direct-current v oltage with a f e w e xter nal components from commercial po w er supply . 1. t r ansf or mer-free ,compact,and lightw eight 2. t r ansf or mer-free ,p o w er sa ving on stand-b y "1/2" 3. 2-output types perf ect f or dr iving logic ,and po w er circuit. 4. built-in t r ansf or mer , isolation a c/dc con v er ter bp5081a15 bp5086a24s bp5085-15 dc113 ~170 dc226 ~358 5 4 5 350 1 350 15 24 15 80 220 80 p ar t no . input(v) output1 (v/ma) output2 (v/ma) ac100v 15v 80ma 5v 350ma bp5081a15 ac100v switching control voltage detector current detector transformer + + recommended application applications used by connecting other sets with code or cable set with sensor bp5034d12 bp5062 bp5035 bp5061 8.3kwh per y ear 10.2kwh per y ear 4.1kwh per y ear 6.2kwh per y ear ei28 siz e tr ansf or mer a c100 12v ,0.1a ei52 siz e tr ansf or mer a c100 12v ,0.5a ei35 siz e tr ansf or mer a c100 12v ,0.2a ei42 siz e tr ansf or mer a c100 12v ,0.3a 16.2kwh per y ear 18.1kwh per y ear 8.2kwh per y ear 10.7kwh per y ear par t no . t r ansf or mer p o w er consumption a c/dc con v eter p o w er consumption condition (7117.5 hours per ann um) a c/dc con v eter t r ansf or mer+3ter minal regulator mounting spaces 15.7max. mar k side 4 + 1.0 28.2max. 10.0max. 3.5max. 6.5max. 2.54x9=22.86 1 2 4 10 8 7 6 5 3 0.5 + 0.1 p=2.54 + 0.2 1.3 + 0.2 0.25 + 0.05 3.25max ei28siz e t r ansf or mer estimation is based on 100v a c con v er ted to 12vdc with 0.02a current. a c/dc con v eter (bp5034d12) estimated is based on plug in times of 7117.5 hours per y ear 2.1 kwh per y ear 1 4 1 2 5.2 kwh per y ear 2/2
appendix appendix1-rev1.0 the products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document use silicon as a basic material. products listed in this document are no antiradiation design. about export control order in japan products described herein are the objects of controlled goods in annex 1 (item 16) of export trade control order in japan. in case of export from japan, please confirm if it applies to "objective" criteria or an "informed" (by miti clause) on the basis of "catch all controls for non-proliferation of weapons of mass destruction.
|
